Professionally installed interior drainage that manages groundwater and hydrostatic seepage before it reaches your finished floor or stored belongings.
The practical approach when exterior excavation is not feasible or needed.
All work is performed from inside the structure, preserving driveways, gardens, and exterior features.
Perimeter channels capture water as it enters at the floor-wall joint and route it to a sump pit before it can spread across the basement floor.
Interior drainage is not weather-dependent. Installation can proceed in winter months when exterior excavation and membrane work are not feasible in Olivehill, TN conditions.
Properly designed interior channel systems use gravity to route water to the sump pit without mechanical assistance, supplemented by the pump only when pit level reaches the activation threshold.
Interior drainage systems in Olivehill are installed by saw-cutting a trench around the interior perimeter of the basement floor slab, typically four to six inches wide and deep enough to reach the footing level or just below the slab. This trench is the channel that collects water entering at the floor-wall joint and routes it by gravity toward the sump pit. The saw-cutting process is performed with diamond-blade equipment that produces a straight, controlled cut without excessive vibration damage to the surrounding slab. Dust is a natural byproduct of this process, and our crews use containment and ventilation practices to minimize spread to finished areas of the home.
Once the trench is cut, the system design determines how effectively water is captured. Basic systems use a simple gravel bed with a perforated pipe to collect and route water. More advanced channel profiles, often called proprietary drainage channel systems, incorporate a raised profile that sits slightly above the footing and captures not just floor-joint seepage but also water migrating down the wall face. A wall flange component extends up behind any baseboard or framing material to intercept water running down the wall before it reaches the floor level. This wall flange detail is important in situations where the moisture entry is not strictly at the floor joint but extends up the lower wall section, which is common in Olivehill homes with older block or stone foundations where the mortar has deteriorated.
The sump pit integration is the component that makes an interior drainage system fully functional. The channel system routes water to the pit, and the pump removes it from the pit before it overflows. Pit location is determined by the channel routing geometry, existing pit locations if present, and access to a discharge route. In some Olivehill homes where the basement has been partially finished, the channel must be routed around finished walls and mechanicals to reach an optimal pit location. These routing decisions are made during the assessment and documented in the installation plan. The pit itself is sized to provide adequate storage volume for the expected inflow rate, ensuring the pump is not short-cycling and the system has adequate buffer during peak inflow events.
The honest tradeoffs of interior drainage versus exterior waterproofing are something we address directly during every assessment in Olivehill. Interior drainage is less invasive, faster to install, unaffected by seasonal weather constraints, and generally less expensive per linear foot than exterior excavation and membrane work. However, it does not eliminate the moisture that is contacting the wall surface; it captures and removes water after it enters the building envelope. For homeowners whose primary concern is protecting finished basement space from water accumulation on the floor, interior drainage addresses that objective effectively. For homeowners concerned about long-term wall deterioration from moisture contact, or whose walls show active spalling and efflorescence from chronic wet conditions, the exterior treatment addresses the wall moisture directly. When both conditions are present in the same structure, we discuss a combined approach that treats both the wall surface and manages floor-level seepage.
Every service performed to drainage system standards and local code requirements.
Our full perimeter systems capture seepage from every wall section, routing it to the sump pit regardless of which foundation wall is experiencing the greatest inflow at any given time.
Learn moreWe document which walls show active moisture evidence and design targeted channel runs that address the documented entry points without over-specifying scope.
Get an assessmentThe wall flange component extends the drainage channel up behind the base of the wall to capture moisture migrating down the wall face before it reaches the floor.
Ask about wall flangesPit location decisions consider channel slope, discharge routing, basement layout, and finished area constraints. We document the reasoning for every pit placement recommendation.
Plan your pit locationExisting interior drainage channels can become clogged with sediment, mineral deposits, or root intrusion over time. We inspect, flush, and repair existing systems in Olivehill homes to restore full drainage performance.
Schedule an inspectionExpansion scopes are common when a homeowner finishes additional basement space and discovers that the existing partial channel does not cover the newly used area.
Expand your systemA methodical process that produces a drainage system built to perform for decades.
The assessment produces a written condition report that forms the basis for every specification decision in the installation plan. No work is designed without this foundation.
Diamond-blade equipment cuts the perimeter trench to specified width and depth. Cuts follow a planned route documented in the installation drawing, ending at the designated sump pit location. Dust containment is deployed to protect finished areas of the home during cutting.
Each connection point between channel sections is inspected before the next section is placed to confirm continuity and proper slope transition.
New concrete is poured over the channel system, restoring the floor surface and permanently enclosing the drainage installation. After cure, the full system is tested by introducing water at multiple points along the channel and verifying flow to the sump pit and pump activation.
The results our Olivehill clients experience speak clearly.
I appreciated that the technician was honest about what interior drainage would and would not fix. He identified one wall crack above the floor joint that needed injection treatment, separate from the drainage install, and explained why. That kind of transparency makes a real difference.
From the assessment call to installation completion, everything was communicated clearly. The written proposal broke down every component and I understood exactly what was being installed and why before any work began.
We had the system installed in November, which would have been impossible with exterior work given the ground conditions that time of year. The interior installation was unaffected by weather and completed in a single day. The system handled a major rain event the following week perfectly.
What you need to know to make a confident decision about interior drainage.
The specific installation procedure varies slightly based on foundation type, existing slab thickness, and moisture entry pattern. Block foundations may require weep holes drilled at the base of the block to allow water trapped in the hollow cores to drain into the channel. Poured concrete foundations with floor-joint seepage are typically addressed with the channel profile alone. Our installation crew documents the method used for each wall section and provides this information at project completion.
Interior drainage is a long-term system, not a temporary repair, when it is properly installed and the channel is correctly sized for the inflow volume. The channel system itself has no moving parts and requires no maintenance beyond occasional inspection. The gravel bed does not compact or break down under normal conditions. The drainage profile materials used in quality installations are rated for permanent soil-contact use. Systems installed decades ago continue to perform when the sump pump is maintained and the channel has not been blocked by slab settlement or debris infiltration.
Interior drainage typically costs less per linear foot than exterior excavation and membrane waterproofing, primarily because the excavation equipment, soil management, and backfill work associated with exterior projects add significant cost to that scope. For most standard residential configurations in Olivehill, interior drainage is a more budget-accessible solution. However, cost comparison alone should not drive the decision; the correct approach depends on the moisture entry mechanism present in your specific basement. Installing interior drainage to address a problem that is fundamentally an exterior membrane failure will provide comfort improvement but will not stop ongoing wall contact moisture, which continues to deteriorate the wall material.
The concrete cap poured at the end of the installation day requires 24 to 48 hours of cure time before the basement is fully returned to normal use. We advise homeowners on what activities can resume before full cure and what should wait. The sump pump is tested and operational before the crew leaves, so water management begins immediately even while the concrete finishes curing.
We offer annual drainage system inspection as part of our maintenance program in Olivehill, which covers both the channel system condition and the sump pump. Catching issues like partial blockages or pump wear before they cause failure during a high-inflow event is the purpose of the inspection. Most homeowners find that scheduled annual service eliminates the reactive emergency calls that occur when a problem is discovered during a storm.
Many Olivehill homeowners choose to address interior drainage before finishing a basement, which eliminates the need to remove and restore finished materials. However, we complete drainage installations in finished spaces regularly and coordinate the scope carefully to minimize disruption. The finished floor and base materials removed during installation can typically be sourced and replaced within the standard timeline of a moisture remediation project.
No excavation. No landscape disruption. Just a properly installed channel system that manages water at the point of entry, year after year.
Call +1-866-476-1348 for Assessment